Home Dental Radiology Penetration and lubrication evaluation of vegetable oil with nanographite particles for broaching process

Penetration and lubrication evaluation of vegetable oil with nanographite particles for broaching process

by adminjay


  • [1]

    Gajrani K K, Suvin P S, Kailas S V, Sankar M R. Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid. J Clean Prod 206: 108–123 (2019)

    Article 

    Google Scholar
     

  • [2]

    Shashidhara Y M, Jayaram S R. Vegetable oils as a potential cutting fluid—An evolution. Tribol Int 43(5–6): 1073–1081 (2010)

    Article 

    Google Scholar
     

  • [3]

    Ni J, Feng K, He L H, Liu X F, Meng Z. Assessment of water-based cutting fluids with green additives in broaching. Friction 8(6): 1051–1062 (2020)

    Article 

    Google Scholar
     

  • [4]

    Debnath S, Reddy M M, Yi Q S. Environmental friendly cutting fluids and cooling techniques in machining: A review. J Clean Prod 83: 33–47 (2014)

    Article 

    Google Scholar
     

  • [5]

    Chetan, Ghosh S, Venkateswara Rao P. Application of sustainable techniques in metal cutting for enhanced machinability: A review. J Clean Prod 100: 17–34 (2015)

    Article 

    Google Scholar
     

  • [6]

    Katna R, Singh K, Agrawal N, Jain S. Green manufacturing—Performance of a biodegradable cutting fluid. Mater Manuf Process 32(13): 1522–1527 (2017)

    Article 

    Google Scholar
     

  • [7]

    Madanchi N, Leiden A, Winter M, Asbach C, Lindermann J, Herrmann C, Thiede S. Cutting fluid emissions in grinding processes: Influence of process parameters on particle size and mass concentration. Int J Adv Manuf Technol 101(1–4): 773–783 (2019)

    Article 

    Google Scholar
     

  • [8]

    Padmini R, Vamsi Krishna P, Krishna Mohana Rao G. Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel. Tribol Int 94: 490–501 (2016)

    Article 

    Google Scholar
     

  • [9]

    Yuan S M, Hou X B, Wang L, Chen B C. Experimental investigation on the compatibility of nanoparticles with vegetable oils for nanofluid minimum quantity lubrication machining. Tribol Lett 66(3): 106 (2018)

    Article 

    Google Scholar
     

  • [10]

    Belluco W, de Chiffre L. Performance evaluation of vegetable-based oils in drilling austenitic stainless steel. J Mater Process Technol 148(2): 171–176 (2004)

    Article 

    Google Scholar
     

  • [11]

    Cetin M H, Ozcelik B, Kuram E, Demirbas E. Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 3041 by Taguchi method. J Clean Prod 19(17–18): 2049–2056 (2011)

    Article 

    Google Scholar
     

  • [12]

    Lawal S A, Choudhury I A, Nukman Y. Developments in the formulation and application of vegetable oil-based metalworking fluids in turning process. Int J Adv Manuf Technol 67(5–8): 1765–1776 (2013)

    Article 

    Google Scholar
     

  • [13]

    Khandekar S, Sankar M R, Agnihotri V, Ramkumar J. Nano-cutting fluid for enhancement of metal cutting performance. Mater Manuf Process 27(9): 963–967 (2012)

    Article 

    Google Scholar
     

  • [14]

    Sharma A K, Tiwari A K, Dixit A R. Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review. J Clean Prod 127: 1–18 (2016)

    Article 

    Google Scholar
     

  • [15]

    Gupta M K, Jamil M, Wang X J, Song Q H, Liu Z Q, Mia M, Hegab H, Khan A M, Collado A G, Pruncu C I, et al. Performance evaluation of vegetable oil-based nano-cutting fluids in environmentally friendly machining of inconel-800 alloy. Materials 12(17): 2792 (2019)

    Article 

    Google Scholar
     

  • [16]

    Revuru R S, Zhang J Z, Posinasetti N R, Kidd T. Optimization of titanium alloys turning operation in varied cutting fluid conditions with multiple machining performance characteristics. Int J Adv Manuf Technol 95(1–4): 1451–1463 (2018)

    Article 

    Google Scholar
     

  • [17]

    Amrita M, Srikant R R, Sitaramaraju A V. Performance evaluation of nanographite-based cutting fluid in machining process. Mater Manuf Process 29(5): 600–605 (2014)

    Article 

    Google Scholar
     

  • [18]

    Pashmforoush F, Delir Bagherinia R. Influence of water-based copper nanofluid on wheel loading and surface roughness during grinding of Inconel 738 superalloy. J. Clean Prod 178: 363–372 (2018)

    Article 

    Google Scholar
     

  • [19]

    Sharma A K, Tiwari A K, Dixit A R, Singh R K, Singh M. Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation. Tribol Int 119: 99–111 (2018)

    Article 

    Google Scholar
     

  • [20]

    Wang Y G, Li C H, Zhang Y B, Yang M, Li B K, Dong L, Wang J. Processing characteristics of vegetable oil-based nanofluid MQL for grinding different workpiece materials. Int J Precis Eng Manuf Green Technol 5(2): 327–339 (2018)

    Article 

    Google Scholar
     

  • [21]

    Wickramasinghe K C, Perera G I P, Herath H M C M. Formulation and performance evaluation of a novel coconut oil-based metalworking fluid. Mater Manuf Process 32(9): 1026–1033 (2017)

    Article 

    Google Scholar
     

  • [22]

    Li M, Yu T B, Yang L, Zhang R Y, Wang W C, Wang W S. Parameter optimization during minimum quantity lubrication milling of TC4 alloy with graphene-dispersed vegetable-oil-based cutting fluid. J Clean Prod 209: 1508–1522 (2019)

    Article 

    Google Scholar
     

  • [23]

    Hosseini A. On the quality and integrity of broached surfaces. Int J Adv Manuf Technol 102(1–4): 95–103 (2019)

    Article 

    Google Scholar
     

  • [24]

    Hwang J. Direct observation of fluid action at the chip-tool interface in machining. Int J Precis Eng Manuf 15(10): 2041–2049 (2014)

    Article 

    Google Scholar
     

  • [25]

    Behera B C, Chetan, Setti D, Ghosh S, Rao P V. Spreadability studies of metal working fluids on tool surface and its impact on minimum amount cooling and lubrication turning. J Mater Process Technol 244: 1–16 (2017)

    Article 

    Google Scholar
     

  • [26]

    Sen B, Mia M, Krolczyk G M, Mandal U K, Mondal S P. Eco-friendly cutting fluids in minimum quantity lubrication assisted machining: A review on the perception of sustainable manufacturing. Int J Precis Eng Manuf Green Technol, inpress, DOI https://doi.org/10.1007/s40684-019-00158-6.

  • [27]

    Said Z, Gupta M, Hegab H, Arora N, Khan A M, Jamil M, Bellos E. A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids. Int J Adv Manuf Technol 105(5–6): 2057–2086 (2019)

    Article 

    Google Scholar
     

  • [28]

    Wu P, Chen X C, Zhang C H, Zhang J P, Luo J B, Zhang J Y. Modified graphene as novel lubricating additive with high dispersion stability in oil. Friction 9(1): 143–154 (2021)

    Article 

    Google Scholar
     

  • [29]

    Zahoor S, Ameen F, Abdul-Kader W, Stagner J. Environmentally conscious machining of Inconel 718: Surface roughness, tool wear, and material removal rate assessment. Int J Adv Manuf Technol 106(1–2): 303–313 (2020)

    Article 

    Google Scholar
     



  • Source link

    Related Articles