Method 5: Perform a System Restore Performing a system restore is one of the best ways to fix various issues with a Windows PC like black screen after login. All you need to do is download and install Recoverit. Open the program and then click on the data recovery mode. If your Windows 10 system becomes unbootable.
Windows 10 home screen goes black free download.A Complete Guide to Fix the Windows 10 Black Screen After Login Problem: 5 Different Solutions
If that happens, the screen of the PC could turn black consistently due to an incompatible or outdated graphics card drivers.
However, it would take some unusual way to update the driver as you would not be able to view the screen and the content of the computer.
You can complete the job by restarting your computer and opening it under the Safe Mode with Networking environment. Here are the steps to update the driver in Safe Mode. To enter the Safe Mode, check out this post. After a regular Windows 10 update, third-party apps may malfunction and struggle to adapt to the new settings. This sudden malfunctioning could result in the screen turning black and unusable.
You would have to reaccess the Safe Mode to perform the activity and follows the steps stated below:. There may be some issue with your login credentials that could be becoming a party in the constant black screen on the computer. You would have to go under the Safe Mode to perform this solution as well, especially if the previous methods do not work.
Here are the steps:. The consent submitted will only be used for data processing originating from this website. If you would like to change your settings or withdraw consent at any time, the link to do so is in our privacy policy accessible from our home page.
Manage Settings Continue with Recommended Cookies. Sometimes you might experience, windows 10 black screen with a cursor before login or a blinking cursor after login. So what causing Windows 10 Black screen with cursor? It can occur for several reasons including problems with hardware, software, or a combination of both.
Again corrupted system files, Outdated Graphics card drivers, startup programs or Security software are some common reasons behind windows black screen with cursor after login. Whatever the reason In this post we have some of the best working solutions to fix the problem. If you are also struggling with similar problem, the computer or laptop screen suddenly goes black after the startup and you will get a black screen with a cursor after login follow troubleshooting steps to resolve this issue on Windows If Windows is responsive, a short beep will sound and the screen will blink or dim while Windows attempts to refresh the screen.
Download Win Download Mac. David Darlington. Roll back the Display Adapter Driver 4. Uninstall your Display Adapter Driver 5. Perform a System Restore 6. Check for Loose Connections 7. Disconnect Unnecessary Devices. Use this Windows key sequence to wake up the screen: the “Windows” key, “Ctrl”, “Shift” “B”, all pressed together.
How do I fix a black screen with just the cursor? You may want to use the Windows and “P” keys to open your “Project” menu. Here, press the arrow keys for “Up” and “Down” a couple of times, even if you are not seeing the screen; then press “Enter”. How do I fix a black screen after an update? The screen that appears will show the power button at the right-end; tap it and choose “Restart”. Why does my screen go black after a few minutes Windows 10?
Your screen can go black because of a problem with the physical connection between the video adapter and the display. To enter the Safe Mode, check out this post. After a regular Windows 10 update, third-party apps may malfunction and struggle to adapt to the new settings. This sudden malfunctioning could result in the screen turning black and unusable. You would have to reaccess the Safe Mode to perform the activity and follows the steps stated below:. There may be some issue with your login credentials that could be becoming a party in the constant black screen on the computer.
You would have to go under the Safe Mode to perform this solution as well, especially if the previous methods do not work. Here are the steps:. If all the efforts fail to reap any reward, then the best thing you could try resetting the PC and see if it works or not.
You would have to enable Safe Mode once again to perform the activity. By the way, you can also learn how to fix stuck at automatic repair black screen issue. In most cases, the black screen issue after updating the Windows can be solved with the methods above mentioned. If not, then disconnect all non-essential external devices, such as external hard drives, headphones, Bluetooth receivers, printers, scanners, etc.
When you encounter a problem with the screen goes black for a second in Windows 10, it is recommended to restart your computer first and then try to wake up the monitor screen using a specific shortcut. Incorrect power settings can be the trigger for the problem of the screen goes black for a second in Windows Therefore, it is recommended that you change the power settings and disable fastboot to resolve this issue. The display adapter will directly affect the computer display, and when your display adapter driver is outdated, incorrect or becomes incompatible, it may cause the problem that the screen goes black for a second in Windows For this reason, you need to update, roll back or reinstall the display adapter driver.
When you encounter the problem that the screen goes black for a second in Windows 10, you can check the monitor first to confirm if there is any hardware damage. If the monitor is fine, you can try to fix the problem by resetting the settings.
You can use another computer that is running normally to check if the monitor is in a normal state. After confirming that there is no problem with the monitor, press the menu button on the monitor, find and select the Reset all settings option, confirm this action, and wait for the monitor to reboot.
However, overclocking can increase the pressure on your computer’s power supply, which may affect the display and cause the problem of the screen goes black for a second in Windows For this reason, you need to uninstall all overclocking software from your computer.
As you can see from the results of some user feedback, Windows File Explorer may also be the trigger for the screen goes black for a second in Windows For this reason, you can restart the File Explorer in Task Manager. If you are no longer able to access your desktop, or are unsure if a black screen is caused by a third-party application, then you can troubleshoot by booting Windows 10 through Safe Mode.
As mentioned in the previous method, the issue of the screen goes black for a second in Windows 10 when the computer starts in Safe Mode has been resolved, indicating that it is caused by a third-party application.
At this point, you can uninstall all potentially conflicting applications in Safe Mode. In fact, an outdated version of Windows 10 or the latest version of Windows 10 can cause compatibility issues and be the trigger for the screen to go black for a few seconds in Windows For this reason, you need to update or revert to the Windows 10 version.
From the results of some user feedback, the high contrast feature may also cause the problem of the screen goes black for a second in Windows For this reason, you need to disable the feature. RunOnce is a useful feature of Windows 10 that allows you to specify that the corresponding command will be executed once during the next restart of your computer. However, sometimes this feature can cause black screen problems.
Therefore, you need to end the RunOnce handler. A corrupt user account can also be the cause of the screen goes black for a second in Windows
Windows 10 home screen goes black free download
Learn how to fix black screen of death issues in Windows 10, if it appears on startup, login, or in the Download AVG TuneUpFree Trial. This is extremely annoying sometimes updates get pushed to your PC and when you restart, it might not successfully complete the update get stuck or worse if. Unplug all unnecessary accessories; 4. Try a BIOS/UEFI reset and check the boot order; 5. Launch a Windows repair; 6. Boot into Safe Mode; 7.
