Emergency preparedness and response: guidance for dental settings during the COVID-19 response. 2020.
(Accessed June 26, 2020)
Sourcing personal protective equipment during the COVID-19 pandemic.
JAMA. 2020; 323: 1912-1914
Risk for dental healthcare professionals during the COVID-19 global pandemic: an evidence-based assessment.
J Dent. 2020; 101: 103434
Strategies for rational use of personal protective equipment (PPE) among healthcare providers during the COVID-19 crisis.
Cureus. 2020; 12e8248
Rational use of personal protective equipment (PPE) for coronavirus disease (COVID-19): interim guidance. 19 March 2020.
(Accessed December 11, 2020.)
Assessing the quality of nontraditional N95 filtering face-piece respirators available during the COVID-19 pandemic.
medRxiv. 2020; 2020 (07.25.20161968)
Emergency use authorizations for medical devices.
(Accessed September 25, 2020)
Respiratory protection.
(Accessed December 10, 2020)
A comparison of facemask and respirator filtration test methods.
J Occup Environ Hyg. 2017; 14: 92-103
ASTM F2100-20: Standard Specification for Performance of Materials Used in Medical Face Masks.
ASTM International,
2011: 447-449
Proper N95 respirator use for respiratory protection preparedness. NIOSH Science Blog, Centers for Disease Control and Prevention.
(March 16, 2020. Accessed September 23, 2020)
Surgical mask filter and fit performance.
Am J Infect Control. 2008; 36: 276-282
Selecting models for a respiratory protection program: what can we learn from the scientific literature?.
Am J Infect Control. 2015; 43: 127-132
Comparing mask fit and usability of traditional and nanofibre N95 filtering facepiece respirators before and after nursing procedures.
J Hosp Infect. 2020; 104: 336-343
Fit testing procedures (mandatory).
(Accessed December 10, 2020)
Comparison of two quantitative fit-test methods using N95 filtering facepiece respirators.
J Occup Environ Hyg. 2016; 13: 621-627
Disease outbreak news. 2020.
(Accessed December 8, 2020)
3D printing to support the shortage in personal protective equipment caused by COVID-19 pandemic.
Materials. 2020; 13: 3339
Additive manufacturing in fighting against novel coronavirus COVID-19.
Int J Adv Manuf Tech. 2020; 110: 2913-2927
Statista, Examplatory use of 3D printing to provide medical supplies during coronavirus (COVID-19) pandemic in 2020.
(Accessed December 8, 2020)
Coronavirus (COVID-19) and medical devices.
(Accessed December 8, 2020)
FDA approves first 3D-printed mask for COVID-19 support. Government CIO Media & Research.
(April 6, 2020. Accessed December 8, 2020)
Strengthening N95 filtering facepiece respirator protection programs by evaluating the contribution of each of the program elements.
Workers’ Compensation Board of British Columbia,
2011
N95 respirators and surgical masks. NIOSH Science Blog, Centers for Disease Control and Prevention.
(October 14, 2009. Accessed September 23, 2020)
Use personal protective equipment (PPE) when caring for patients with confirmed or suspected COVID-19.
(Accessed September 23, 2020.)
Comparison of nanoparticle filtration performance of NIOSH-approved and CE-marked particulate filtering facepiece respirators.
Ann Occup Hyg. 2009; 53: 117-128
TEB-APR-STP-0059, Revision 2.0. Determination of particulate filter efficiency level for N95 series filters against solid particulates for non-powered, air-purifying respirators standard testing procedure (STP).
(Accessed September 23, 2020.)
Final rules and notice.
Fed Regist. 1995; 60 (42 CFR 84.): 30336-30398
ASTM F2299 / F2299M-03(2017): Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres.
ASTM International,
2017
Do facemasks protect against COVID-19?.
J Paediatr Child Health. 2020; 56: 976-977
Respiratory fit testing.
(Accessed May 13, 2021)
Modes of transmission of virus causing COVID-19: implications for IPC precaution recommendations.
(March 27, 2020. Accessed December 9, 2020)
Air, surface environmental, and personal protective equipment contamination by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) from a symptomatic patient.
JAMA. 2020; 323: 1610-1612
The education and practice program for medical students with quantitative and qualitative fit test for respiratory protective equipment.
Ind Health. 2016; 54: 177-182
Comparison of five methods for fit-testing N95 filtering-facepiece respirators.
Appl Occup Environ Hyg. 2002; 17: 723-730
Fitting characteristics of eighteen N95 filtering-facepiece respirators.
J Occup Environ Hyg. 2004; 1: 262-271
Respiratory protection against Mycobacterium tuberculosis: quantitative fit test outcomes for five type N95 filtering-facepiece respirators.
J Occup Environ Hyg. 2004; 1: 22-28
